Presenting The Recacril® Design Line by Recasens USA
Recasens most popular 100% solution dyed
acrylic line for marine and other outdoor applications, including
awnings and umbrellas. Recacril is available in popular 58 solids! The
fabric is stocked in 60” width, and is also available in 47" and 96"
widths. Offering both classic and more sophisticated designs, Recacril
canvas will enhance your product’s value to your customers.
If you like Sunbrella, you'll love Recacril! It's woven differently!
Recacril Technical Specifications:
| Fabric Type |
|
|
|
| Name of Fabric |
|
Recacril® |
|
| Base Fabric |
|
100% Solution Dyed Acrylic |
| Characteristics |
|
Tolerance |
| Weight |
|
9 oz. |
+/- 5% |
| Standard Put Ups |
|
65.64 yards |
|
| Finish |
|
Fluorocarbon/Resin |
|
| Finished Widths |
|
59"/150 cm & 47"/120 cm |
|
| Styles |
|
58 solids |
|
| Limited Warranty |
|
5 years |
|
| Specifications |
Test Method |
Test Results |
| UV Resistance |
AATCC-16 |
1500 + hours |
|
| Abrasion Rating |
ASTM-4157 |
40,000 Rubs |
|
| Hydrostatic |
AATCC-127 Method B |
40.6 cm |
|
| Puncture Strength |
ASTM-751 |
38 lbs |
|
| |
|
Warp |
Fill |
| Tear Strength |
ASTM D-2261 |
11.5 lbs |
7.7 lbs |
| Tensile Strength |
ASTM D-5034 Grab |
287 lbs |
149 lbs |
| Shrinkage |
Method 5804 |
0.10% |
0% |
| Stretch |
ASTM D-2594 |
0% |
0% |
Proper cleaning and care should be
taken to ensure the life of Recacril® fabrics. For regular care and
maintenance, excessive dirt should be brushed from the fabric using a
soft brush. Fabric should then be sprayed with warm water (not
exceeding 100°f/40°c) and air dried. Periodically the fabric should
undergo a more thorough cleaning; again brush fabric with a soft
bristled brush, spray with warm water, and then apply a gentle
non-detergent soap and let stand for 10 to 20 minutes before rinsing.
Rinse thoroughly and air-dry. DO NOT USE DETERGENT.
The warranty protects the
loss of characteristics, rot, mildew and discoloration typical in normal
atmospheric conditions. This warranty does not apply against
deterioration of any kind due to abusive use, accidental burns,
negligence, vandalism, perforations, natural disasters of acts of
nature. Normal wear, weather soiling, or stains from environmental
pollution of other sources are not covered. The product must be properly
installed and maintained. the warranty, if applicable, does not cover
labor, frames, systems and installation supplied by the dealer.
Recasens makes no fitness of warranty for any any
particular purposes with respect to the goods being sold. To obtaing
replacement fabric, call your Dealer. Upon verification, your dealer
will send a certified letter containing the appropriate information and
facts to Recasens/
Recasens agrees to replace, free of charge, the
appropriate amount of the defective fabric with the same fabric. There
are no warranties, expressed of implied, that axtend beyond the the
description on the face of this agreement. |
